Asbestos Removal: What You Need To Know About The Asbestos Removal Control Plan (ARCP)

Why Is The Plan Necessary During Removal Projects?

The ARCP is necessary by Australian law, as cited in section 139B (1) of the Building Act 2004. This act requires that your ARCP contains at the very least these information:

• Method you desire to use in removing asbestos
• Approximate amount and kind of asbestos you're removing
• Equipment to be used during the procedure; include any protective gear used by workers
• Detailed information on the best way to control airborne asbestos. Must be in respect with the'NOHSC code of practice for the safe removal of asbestos ', published by Office of the Australian Safety and Compensation Council.

ARCP Is Also Needed For Building Approval

When applying for building approval, section 26(2) of the Building Act 2004 requires you to have asbestos removal control plan. This plan should accompany your application, based on the following conditions: 

construction started before 1985 and the building is class 1, 2, 3 or 4 or it's an associated class 10 building.

A little bit of explanation is needed concerning what class 1, 2, 3 or 4 buildings mean. This can be a classification of erected buildings or any kind of a building, in line with the Building Code of Australia. Such classification is on the basis of the purpose for which a particular building or part of it is designed and constructed, or how you intend to use it.

Here's an in-depth description of each class:

(I) Class 1: May be a number of buildings, which constitute:

(a) Class 1 (a) single dwelling that's

- A sole detached house or
- One in several several than two attached houses, and is separated with a fire-resisting wall
(b) Class 1 (b)
- A residence used commercially: guest house, boarding house or possibly a hostel (it shouldn't exceed a total part of 300m2¬ on all floors and it must have significantly less than 12 residents) or 

- Four or even more single houses which are used for temporary holidays. They should not be located above or below another dwelling or another class of building. A garage, however, is allowed.

(ii) Class 2: This classifies a building that has two or more units of sole-occupancy and each is really a separate dwelling.

(iii) Class 3: Classifies a residential building, that is neither class 1or 2. This is a common place where people go on a longterm basis. Samples of this class are: lodgings, homes for the old, residential areas in schools, among others.

(iv) Class 4: A residence in a building classified as 5 through to 9 and must be the only dwelling in the building.

(v) Class 10: This classifies a non-habitable house. It is actually a garage, fence and a bushfire shelter among others.

Visit here :

© 2017 Anthony Garfield.All rights reserved.
Powered by Webnode
Create your website for free!